Sunday, February 7, 2010

Assembly Table: Mostly Finished



I still don't have the drawers built, and lots of tools still need to be reorganized, but here you can see the table with much of the clutter removed.

The chamfered edge has been sanded, and I'll apply a coat or two of polyurethane in the very near future. The poly will protect the surface and make everything just a bit slippery so it will be easy to move projects around as need. I could easily wax the surface if I wanted to make it slicker still, but I don't.

I have also moved the drill press arm from it's old, temporary location to this new spot, mounted high above the drill press itself. A higher mounting point means more stability as the arm will be used in a more vertical manner than before. This is how I designed it in the first place, knowing it would eventually live in this new location. the thing is mostly made of 1/2 inch plywood so it can flex a bit if needed. It works best when it doesn't have to support much of it's own weight at the same time.

Here you can see the arm from the side. It has a shoulder, elbow, wrist and hand to hold the vacuum hose in place. I used it about an hour after this photo was taken and it worked great with no adjustments during the operation. I always had to fiddle with it during use in the old location.

Now I must clean up a bit more, then start building the big star for Trevor's school group. After that I have a couple of things I need to do for my online marketing team, Design Style Guide. I'll be participating in the Easter Give-A-Way, and I think I'm going to build something specifically for that event.

When I'm done with those things I'll start building my router table. It will replace the right extension wing on my table saw. I've been itching to start this for the last few months.

1 comment:

Allison Crawford said...

Looking very nice, keep up the great work.